Measuring Guide

Shortening

Put on the item and place a mark using a pin, safety pin, chalk, or clip at the desired length.
If you prefer, you can also specify the length in centimeters for more accuracy.

Taking In

• Case 1:
  Mark with several pins if there are stitching differences.
  Example request: “Take in 3 cm from the hem, gradually blending into the underarm or sleeve seam.”
• Case 2:
  If you do not want stitching differences, place a single mark and specify this to the agent.
  Example request: “Take in 2 cm from the hem, including the sleeve.”

Useful Tip
If it is uncomfortable for you to put the item on, compare it with a similar item that fits you well and use it as a reference for the markings. We will take care of the rest, so your item is perfectly adjusted!

Shortening

Put on the item, whether it is a skirt or a dress, and place a mark using a pin, safety pin, chalk, or clip at the desired length. If you prefer, you can specify the length in centimeters for more precision.

Taking In

1. Case 1:
   • Place several pins if differentiated adjustments are needed.
     Example request: “I would like you to take in 5 cm from the waist and gradually blend into the hem seam.”
2. Case 2:
   • If you want a uniform adjustment, without stitching differences, place a single mark and tell the agent.
     Example request: “Take in 3 cm from the waist all the way down.”

Useful Tip
If it is difficult for you to put the item on in order to place the marks, use a similar skirt or dress that fits you well. Compare the length and width and make the markings based on it. We will take care of all the details to adjust your item exactly as you want!

Mark or specify the desired dimensions. Example:

• Pillowcase: 50×70 cm
• Duvet cover: 160×200 cm
• Bed sheet: 200×200 cm

Mention the desired height. Example: measure from the rail, curtain rod, or ceiling down to the floor.

General note: The standard apartment height is between 2.5 m and 2.55 m.

To shorten the sleeves, fold the sleeve up to the desired length and place a mark using a pin, safety pin, chalk, or clip.